■ Gypsum plasterboard inlay 12.5mm (F30)

■ Certified to EN 1365-2 from below for suspended ceilings under solid ceilings of type II and III, F30-AB according to DIN 4102-2

■ Opening and closing by pressing on the door leaf

■ Flap can be removed completely

■ With safety gears

■ Special sizes on request

■ Clear width = dimensions A - 15mm

■ Gypsum plasterboard inlay 15mm (F30)

■ Certified to EN 1365-2 from below for suspended ceilings under solid ceilings of type II and III, F30-AB according to DIN 4102-2

■ Opening and closing by pressing on the door leaf

■ Flap can be removed completely

■ With safety gears

■ Special sizes on request

■ Clear width = dimensions A - 15mm

■ Gypsum plasterboard inlay 25mm (F30)

■ Certified to EN 1365-2 from below for suspended ceilings under solid ceilings of type II and III, F30-AB according to DIN 4102-2

■ Tested according to DIN EN 1364-2 from above for independent suspended ceilings

■ Opening and closing by pressing on the door leaf

■ Flap can be removed completely

■ With safety gears

■ Special sizes on request

■ Clear width = dimensions A - 15mm

■ 40mm plasterboard fire protection boards

■ Two-piece Fire Protection Pack

■ Tested according to EN 1365-2: 1999-10 from below

■ Tested for fire protection from above

■ Frame and flap made of galvanised steel

■ Opening and closing by pressing on the door leaf

■ Flap can be removed completely

■ With safety gear

■ Gypsum plasterboard inlay 40mm (F90)

■ Tested according to EN 1365-2: 1999-10  ABP: P-MPA-E-047-043 from below

■ Frame and flap made of galvanised steel

■ Locking with square lock

■ For fire safety, no additional fire protection pack is required!

■ Ready to install, with square key

■ Gypsum plasterboard inlay 50mm (F90)

■ Tested according to EN 1365-2: 1999-10  ABP: P-MPA-E-047-043 from below

■ Frame and flap made of galvanised steel

■ Locking with square lock

■ For fire safety, no additional fire protection pack is required!

■ Ready to install, with square key